Laser Handheld Welding Single Pendulum Double Pendulum Difference

Double pendulum welding head and single pendulum welding speed difference, laser handheld welding single pendulum and double pendulum the biggest difference is their movement. Single pendulum is a unidirectional linear movement, that is, the welding head can only move in one direction, and the welding process to constantly adjust the welding angle to meet the requirements of the welding surface. This mode is suitable for welding small areas, as it requires a higher level of skill from the welder.

The double pendulum, on the other hand, is more flexible than the single pendulum in that it can move both horizontally and vertically, which makes it suitable for welding large areas, as well as for jobs that require smooth surfaces to be welded. The double pendulum's movement is more complex and requires some experienced welders to operate.

In addition to the difference in motion, another significant difference between laser handheld welding single and double pendulums is the range of applications. Single pendulum is suitable for small welding, such as electronic components, jewelry and other small products. Since the single pendulum welding speed is slower, it is suitable for more delicate work. A double pendulum, on the other hand, is suitable for large-scale welding, such as automobile manufacturing and construction. This is due to the fact that the double pendulum has a higher welding speed and processing efficiency.

It is important to note that the choice between single and double pendulums is related to the material of the welding job, and sometimes single pendulums can be used for large-scale welding, depending on the material to be welded and the condition of the work surface. If the welding material is thin, then the single pendulum is more suitable, if the welding material is thick, then the double pendulum is more suitable.

Laser handheld welding single pendulum and double pendulum are more commonly used welding equipment, the difference between the two is the mode of movement and scope of application. Single pendulum is suitable for small welding, slow welding speed, high precision; and double pendulum is suitable for large area welding, with high welding speed and processing efficiency. The key to choosing the right welding equipment for you is to understand the nature of your welding work and the needs of the welding effect.

The difference in welding speed between a double-pendulum head and a single-pendulum head depends mainly on the amount of work and the complexity of the welding process.

Double pendulum welding heads typically have higher welding speeds than single pendulum welding heads due to the ability of the double pendulum to move both horizontally and vertically, which makes it suitable for welding large areas and for jobs that require smooth surfaces. This increase in welding speed and process efficiency gives the double pendulum welding head an advantage in large welding machine tasks such as automotive manufacturing and construction.

However, there are certain delicate jobs where a single pendulum welding head may have a higher welding speed. Because the single pendulum has a unidirectional linear motion, the weld head can only move in one direction, which makes it possible to adjust the weld angle much faster in cases where the weld surface is more demanding. This situation is suitable for welding of small areas, such as electronic components, jewelry and other small products.

To summarize, the difference in welding speed between a double-pendulum welding head and a single-pendulum welding head depends on the specific workload and the complexity of the welding process. In large welding tasks or where high efficiency is required, a double pendulum welding head may be more advantageous; whereas in welding tasks that require a delicate and demanding process, a single pendulum welding head may be more appropriate.