Daily Maintenance of Metal Laser Cutting Machine

Metal laser cutting machine is a kind of advanced equipment that utilizes high energy density laser beam to cut various metal materials, which is widely used in sheet metal processing, machinery manufacturing, automobile manufacturing and other fields. Any product needs good maintenance to get a longer service life, this article will introduce the main points of daily maintenance and repair of metal laser cutting machine.

First, maintenance of the laser

The laser is the core component of the metal laser cutting machine, which provides a cutting light source for the laser cutting machine. In order to ensure the stable output power and life of the laser, you need to regularly check and maintain the laser road. The specific methods are as follows:

1, Check the quality and temperature of the cooling water every day to ensure that the cooling water is clean, free of impurities and air bubbles, and the temperature is set at 23-26 degrees in winter and 26-29 degrees in summer. It can effectively extend the service life of the water tank.

2, In the cutting process dust into metal impurities, laser internal dust cleanup is required for all machine routine maintenance.

3, The water inside the water cooler needs to be replaced regularly, the general replacement frequency is one month.

Second, maintenance lenses

Lenses are an important part of the cutting head, and they include collimating, focusing and protective lenses. The lenses are easily contaminated by dust or other pollutants, resulting in damage to the surface coating of the lenses or reduced transmittance, affecting the cutting quality and efficiency. Therefore, it is necessary to clean and protect the lenses in a dust-free environment, which can effectively extend the service life of the lenses.

Third, maintenance of machine tools

The machine tool is an important part of the metal laser cutting machine, once the machine tool is deformed, it will affect the cutting precision and effectiveness. In order to ensure the stability and life of the machine tool, you need to regularly clean and lubricate the machine tool. Specific methods are as follows:

1,Daily check whether the power supply voltage and the machine rated voltage, so as not to cause unnecessary damage.

2,Every day to check whether the machine tool table has foreign residue, need to be cleaned up in a timely manner, so as not to affect the normal cutting.

3,Clean up the dust and dirt in the machine once a week, and all electrical cabinets should be closed tightly to prevent dust.

4,Once a week to clean up the horizontal, longitudinal guide, rack and pinion, and timely filling of lubricating oil.

5,Monthly check whether the horizontal and longitudinal rail rubbing products are working properly, if not, replace them in time.

6,Monthly check whether all the cutting torches are loose, clean up the garbage in the ignition muzzle, make the ignition keep normal.

7,Replace the water tank and filter once a year to ensure the normal operation of the cooling system.

The above introduction is the daily maintenance and maintenance of metal laser cutting machine. For more information, feel free to contact us!ARGUS Laser has many years of experience and is always looking forward to your joining us!