Publish Time: 2023-02-24 Origin: Site
Handheld Laser Welding Machine It has become the standard for high-end industrial manufacturers, so how should the handheld laser welding machine be maintained during operation? The following is the common operating knowledge of handheld laser welding machine.
Maintain a good operating environment
General machinery and equipment can operate normally under normal circumstances, but once you encounter special circumstances, you need to pay attention to whether the machinery and equipment in this case can run as well as precautions. For example, in the high temperature and humid environment, the torch laser in the work, you need to pay attention to the state of the cooling water pipeline, the pipeline should not appear condensation, because once the cooling water pipeline problems, it is easy to handheld laser welding machine damage, can not be normal output power, and in serious cases may lose the lighting function.
Check the optical components on time
After the mechanical equipment has been running for a period of time, the important components that are easily damaged should be checked. Generally, after two weeks or one working cycle, the components in the optical path such as YAG rods, dielectric diaphragm, lens protection glass, etc. should be checked before starting to ensure that there is no dust and other pollution on the optical components. Once the abnormal situation occurs, it should be dealt with in time to avoid damaging the optical components after starting.
Check laser beam quality on time
The quality of the laser beam of a handheld laser welder is critical to the operation of the machinery and equipment. Operators typically use laser dimming paper to periodically check the laser's output spot. If the spot is uneven or the energy drops, the resonant cavity of the optics needs to be adjusted and the spot fine-tuned to ensure the quality of the laser beam.