Laser Machine News

A greeting card is a token of appreciation and a wish. Whenever there is a happy event or a blessing coming, people will always pass the good news to their friends and relatives through greeting cards. With the development of the times, the traditional uniform greeting cards have gradually withdrawn

Types of Welding Processes :- Welding is an fabrication process where nearby two or three parts are fused together by means of heat, pressure, or both forming a joins as the parts cool. Welding is usually performed on metal & thermoplastic but they can also be used on to the wood.Types of Welding Pr

The choices are numberless when it comes to types of laser cutting machines. We can divide them on the following basis.

The UV laser marking machine is specially designed for fine marking, fine cutting and engraving, and micro-processing of special materials. It has a high cost. It is especially suitable for marking, micro-holes, glass materials, and high-speed division of glass materials and silicon wafers carry out

A creative greeting card can not only show personal taste, but also convey your sincerity to the recipient of the card. In order to enable greeting cards to engrave more complex and creative patterns, Sunic Laser has been focusing on the laser industry for 24 years, and has independently deve

The beam focusing spot of UV laser marking is smaller and finer, which can realize ultra-fine marking, the heat affected area is very small, the thermal effect is relatively small, and the problem of material scorching damage will not occur. It has the advantages of high efficiency, stable perfo

#Argus #Sunic #Laser #cleaning is a green method used to dispose of rust, paint, oxide, and different contaminants from metallic surfaces. Because of its efficiency, it’s far being utilized in increasingly more applications. Laser cleansing calls for a pulsed fiber laser (usually 50 watts or more).

Handheld laser welding machine is a portable and operable equipment. It can be precise welding equipment, but suitable and flexible for a variety of environments, specifically for certain production supplementary operations and packaging management with more professional standards and reliability.

When the focused laser beam hits the workpiece, the irradiated area heats up dramatically to melt or vaporise the material. Once the laser beam has penetrated the workpiece, the cutting process begins: the laser beam moves along the contour line and melts the material at the same time. A jet of air

The most straightforward method of generating laser pulses is to add a modulator to the outside of the continuous laser. This method produces pulses in the fastest picosecond range, which is simple but wastes light energy and the peak power does not exceed the continuous light power. Therefore, a mo