Publish Time: 2021-08-12 Origin: Site
The laser trimming machine is a laser-produced by the laser and transmitted by the reflecting mirror and irradiated on the processed item through the focusing mirror so that the processed item (surface) is subjected to strong heat energy and the temperature increases sharply so that the point quickly melts or vaporizes due to the high temperature. , Cooperate with the running track of the laser head to achieve the purpose of processing. Then, let's introduce in detail How to maintain the laser trimming machine?
Here is the content list:
l Water replacement and water tank cleaning
l Fan cleaning
l Cleaning of the guide rail
It is recommended to clean the water tank of the laser trimming machine and replace the circulating water once a week. Make sure that the laser tube is filled with circulating water before the laser trimming machine works. The water quality and temperature of the circulating water directly affect the service life of the laser tube. It is recommended to use pure water and keep the water temperature below 35"C. If it exceeds 35°C, replace the circulating water.
To clean the water tank, first, turn off the power of the laser trimming machine, unplug the water inlet pipe, let the water in the laser pipe automatically flow into the water tank, open the water tank, take out the water pump, and remove the dirt on the water pump. Clean the water tank, replace the circulating water, restore the water pump back to the water tank, insert the water pipe connected to the water pump into the water inlet, and arrange all joints. Power on the water pump alone and run it for 2-3 minutes (make the laser tube full of circulating water).
Long-term use of the fan of the laser trimming machine will cause a lot of solid dust to accumulate in the fan, causing the fan to generate a lot of noise, and it is not conducive to exhaust and deodorization. When the fan suction is insufficient and the smoke is not smoothly exhausted, first turn off the power of the laser trimming machine, remove the air inlet and outlet pipes on the fan, remove the dust inside, then turn the fan upside down and pull the wind inside. Leaf until it is clean, then install the fan.
Guide rails and linear shafts are one of the core components of the equipment, and their function is to play a guiding and supporting role. In order to ensure the high processing accuracy of the laser trimming machine, the guide rails and straight lines are required to have high guiding accuracy and good movement stability. During the operation of the laser trimming machine, a large amount of corrosive dust and smoke will be generated. This smoke and dust will be deposited on the surface of the guide rail and linear axis for a long time, which has a great influence on the processing accuracy of the equipment and will be on the surface of the linear axis of the guide rail. Corrosion points are formed and the service life of the equipment is shortened. In order for the laser trimming machine to work normally and stably and to ensure the processing quality of the product, the daily maintenance of the guide rail and linear axis must be done carefully.
The laser trimming machine must be paid attention to during operation, and usually care and maintenance must be paid to increase the service life of the equipment, save costs, and create greater benefits.
Wuhan Sunic Photoelectricity Equipment Manufacture CO., LTD has carried out a lot of tests on the laser trimming machine before leaving the factory, and the quality can be guaranteed. If you are engaged in the business of laser trimming machines, you can consider using our laser trimming and Ultra-fast Laser System products.If you are engaged in the business of PVC insulated wires, you can consider using our cost-effective products.