You are here: Home » News Center » Application Industry » Paper Laser Cutter

Paper Laser Cutter

Views: 0     Author: Site Editor     Publish Time: 16-07-2024      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Paper Laser Cutter

One of the most significant advantages of using a laser cutter for paper is the unparalleled precision it provides. Traditional cutting methods, such as using knives or scissors, often result in jagged edges and imprecise cuts, especially for intricate designs. Laser cutters, on the other hand, utilize a focused beam of light to cut through paper with extreme accuracy, allowing for the creation of complex and detailed patterns. This level of precision is particularly beneficial for artists and designers who require intricate detailing in their work, such as in papercraft, scrapbooking, and intricate invitation designs.


SCM2000刻字膜






1. No touch processing.

2. High Speed 7000mm/s , Just about 7 seconds for one card.

3. No yellow and black edge, high quality laser beam make high good quality .

4. Eco-friendly, EU, FDA, ISO, ROHS stands

5. Long work life, over 20,000 hours. About 5 years if follow 12 hours one day, then be refill after its gas runs out .





2.paper样品2(1)(1)

Advantage of CO2 Dynamic Laser Marking Machine

1.Permanent

Mark will not subside because of environmental reasons(touch, acidic or reducing gas, high or low temperature etc).

2. Non-contact

Laser marking is a non-mechanical “light knife” for processing, the workpiece will not produce stress after marking. The working surface will not produce corrosion, no “tool” worn, non-toxic, non-polluting.

3. Wide application

CO2 Dynamic Laser Marking can work on all non-metal materials(Textile, Leather, PMMA, Wood, MDF, Paper, Marble, Glass etc.)

4.High precision for engraving&marking

CO2 Dynamic Laser Marking Machine can engrave fine pattern, the minimum line width can reach to 0.04mm. Engraving&Marking result is clear, durable and beautiful.

5. Low operating costs

Low energy consumption, no consumptive materials, and therefore lower operating costs.

6. High efficiency

CO2 Dynamic Laser Marking Machine’s Engraving&Marking speed can reach to 7000m/s, three times than that of traditional laser marking machine, marking process can be completed in seconds.

7. Large marking area

With the high power laser tube and the 3D Scanner technology, the CO2 Dynamic Laser Marking Machine can work on large size materials such as the clothes processing, leather processing, LGP(Light Guide Plate for LED Panel Light and TV) processing.



laser-cut-paper(1)(1)

Wedding Cards, Pop up cards , Pop up books, Candy box Laser Processing .

CO2 Dynamic Laser Marking Machine can cutting Wedding & Invitation Cards, Pop up cards, Pop up books, Candy boxes. Comparing with normal CO2 Laser X-y table models machine, it has smaller carving line and high cutting speed( Normally cutting one paper card just needs 7-10 seconds), Therefore, the final products will have no black cutting burn edge and increase the processing efficiency.






Leading Paper Laser Cutter Supplier



2pcs-Christmas-Greeting-Card-Kraft-Paper-Layering-Laser-Cut-Handmade-Christmas-Card
paper


3D Note Paper


Paper products (2)


Greeting paper card (6)


Greeting paper card (10)

Greeting paper card (1)


Greeting paper card (9)


contact-us-5-stauber










Laser machine category

Argus Laser, your professional 
laser solutions supplier since 1998 !!!
Laser cutter and engraver Manufacturer and supplier in China.
 

Laser Products Category

Get In Touch

  Address: NO.4 Huanglong Shan North Road, East Lake High-tech District, Wuhan City, China
  Cel/whatsapp/wechat: :+86-15927005027
  E-mail: suniclaser@sunic.com.cn
Contact Us
Copyright  Wuhan Sunic Photoelectricity Equipment Manufacture Co.,LTD. Supported by Leadong